HPS 2401 EIB/KNX HPS 2401.1 AKILLI BİNA KOMPAKT DENEY SETİ

Açıklama

TRADING GROUPS ON THE BOARD ;
—————————————————————- ——————–

● Power Supply Unit;

● 29V/500 mA Via Bus Meets Power Requirements of EIB/KNX Components

● Choke

● Data Interface

● Binary Inputs, 4 fold

● Keyed Actuator, 4 fold

● Bus Coupler

● Sensor Consists of Programmable LED Displays and 4 Double Switches.

● Bus Detector (LED)

● 2 Buttons/2 Switches with Control Lamps, 230 V (pilot lamp)

● 4 Lamps for Load Simulation (230 V AC, 5 W)

● Mounting Rail with Data Bus to Attach Commercially Available EIB/KNX Components

● Adapter, 8 Pole, 4mm Safety Jacks to Match Normal Wiring Lines

● Extension Section for Connections with 4mm Secure Jacks (L/N/ PE)

EXPERIMENTS THAT CAN BE DONE AND THE SUBJECTS THAT CAN BE EXPLAINED THROUGH THE EXPERIMENT SET ;
—————————————————————- —————————————————————- ——————————
Mounting Rail with EIB/KNX Component
Attached Secure Cables Connected to the Adapter and Example of Connection to Wiring Lines

● Deactivation Experiments

● Two-Wire Circuits

● Intermediate and Inrush Current Circuits

● Brightness Control

● Tests of Smart Building Projects and Tests of Fail-Proofs Projects and Diagnostics

Technical Data
——————-

Mains connection

– Voltage: 230 V AC; 50 … 60 Hz; 50VA

Power supply (built-in)

– 29 VDC; 500 mA (short-circuit-proof, with operating and overload

display by LEDs)

The power supply feeds all EIB components.

The 29 V can be tapped additionally at 2 mm jacks or tophat

rail contacts, e. g. for connecting another choke.

Mechanical data

The front panel of the INSTALLATION BOARD is made of 5 mm

thick laminate, matt blue in color with white engraving

representing the built-in function groups.

The individual EIB components are integrated into the front panel.

The rear of the Board is protected with a grey plastic cover.

Its shape allows the Board to be placed at an ergonomically

favorable angle for example on a table.

Accessories included

– Templates with printed ground plans

– Tagboard with label strips for documentation of the parade –

ters dedicated to the EIB components

Dimensions and weights

– Board version (Type 2401.1): 532 x 297 x 120 mm (w x h x d)

weight: approx. 3.75 kg

– Box version, consisting of:

INSTALLATION BOARD (Type 2401.1) and

Box (Type 2401.20): 580 x 450 x 155 mm

total weight: approx. 6.55kg